Protective Sealant and Densifier

Product Details:

ClearSeal is applied as a transparent, invisible, non-film forming impregnation for enhanced resistance against oil, water, dirt and stain. General tendency towards staining of the surface is considerably reduced.

ClearSeal is chemically bonded to the concrete surface, thus giving a long lasting protection. Oil, water and stain forming liquids, like coffee, soft drinks etc. repel on the surface and can be easily removed, e.g. by using an absorptive tissue.

ClearSeal offers several important investment enhancing benefits as follows:

• Water and Oil repellence
• Practically no visible changes of the treated concrete surface
• Good stain resistance
• Prevents algae and moss formatio
• Improved cleanability for surface
• Reduces primary efflorescence
• UV stable and non yellowing
• Non hazardous during application and use
• Non hazardous during application and use
• Environment friendly
• Solvent free and hence non-carcinogenic

Product Details:

Enhancing Sealer for concrete and absorbent stones. AcrySeal is a water based, transparent, film forming, colour enhancing and protective coating material. It is used in the VYARA range of PremierShield protected products, and now offered to customers, in manageable pack sizes. Years of trials and experience has shown the AcrySeal to be among the finest transparent water based acrylic coats.

It is easy to apply, and UV resistant, making it ideal for exterior applications. AcrySeal offers several important investment enhancing benefits as follows:

• Water and Oil repellence
• Colour enhancement
• Satin finish and shine
• Good stain resistance
• Prevents algae and moss formation
• Improved cleanability for surface
• Efflorescence preventer
• UV stable and non yellowing
• Non hazardous during application and use
• Film forming yet breathable
• Environment friendly
• Solvent free and hence non-carcinogenic

Product Details:

FF Densifier is a clear silicate based liquid which provides several benefits like hardening, densification and sealing of Concrete surfaces. It is particularly effective and recommended for use in obtaining polished concrete finishes. Normally applied before the final polishing coats, the FF Densifier will make a perceptible difference to the strength and gloss of the polished surface. As the FF densifier has zero Volatile Organic Content, it environmentally friendly.

Features:

• FF Densifier has zero Volatile Organic Content, hence it environmentally friendly
• Greatly improved abrasion, impact resistance and life expectancy
• Protects against efflorescence
• Produces a dust free waterproof surface
• Single coat easy application
• Reduced chemical attack from hydrocarbons and other chemicals
• Long term performance
• Can be polished to produce high strength
• Can be used over FF Terrazzo and HardTop
• Treated surface can receive coatings

Product Details:

SuperSeal is an extremely heavy-duty, stain resistant, new generation coating and sealing material for plain, textured or polished concrete surfaces and slightly absorbent stones.

• Easy to apply-with a cleaning mop, shorthair roller or by airless spray.
• Colour enhancement-Crystal clear wet look effect
• Excellent all-round protection from stains-Protection offered is comparable to high quality 2k PU systems (without the associated risks of blistering of surface)
• Good stain resistance to (under test conditions) water, waste oil, stain resistant to cleaning agents from Ph range 1 to 10, Ethanol, Diesel, household stainers like soft drinks, ketchup, coffee, mustard, olive oil, chewing gum etc.
• Excellent hardness and abrasion and scratch resistance-gives very high durability
• Excellent heat resistance-up to 300degreeC
• Very good adhesion to concrete floors
• Environment friendly-solvent and isocyanate free, odourless and non labelling
• Low VOC (~0,5%, 6g/l) (Directive 2010/75 EU)
• High Flash Point-not easily flammable
• Easy to repair after severe wear-Patching up on coating possible easily